1.1 --- a/ide.analysis.modernize/test/unit/data/com/sun/tools/ide/analysis/modernize/YamlTest/hello-world/nbproject/Makefile-impl.mk	Sun Jun 25 18:17:37 2017 +0200
     1.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.3 @@ -1,133 +0,0 @@
     1.4 -# 
     1.5 -# Generated Makefile - do not edit! 
     1.6 -# 
     1.7 -# Edit the Makefile in the project folder instead (../Makefile). Each target
     1.8 -# has a pre- and a post- target defined where you can add customization code.
     1.9 -#
    1.10 -# This makefile implements macros and targets common to all configurations.
    1.11 -#
    1.12 -# NOCDDL
    1.13 -
    1.14 -
    1.15 -# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
    1.16 -# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
    1.17 -# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
    1.18 -# and .clean-reqprojects-conf unless SUB has the value 'no'
    1.19 -SUB_no=NO
    1.20 -SUBPROJECTS=${SUB_${SUB}}
    1.21 -BUILD_SUBPROJECTS_=.build-subprojects
    1.22 -BUILD_SUBPROJECTS_NO=
    1.23 -BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
    1.24 -CLEAN_SUBPROJECTS_=.clean-subprojects
    1.25 -CLEAN_SUBPROJECTS_NO=
    1.26 -CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
    1.27 -
    1.28 -
    1.29 -# Project Name
    1.30 -PROJECTNAME=hello-world
    1.31 -
    1.32 -# Active Configuration
    1.33 -DEFAULTCONF=Debug
    1.34 -CONF=${DEFAULTCONF}
    1.35 -
    1.36 -# All Configurations
    1.37 -ALLCONFS=Debug Release 
    1.38 -
    1.39 -
    1.40 -# build
    1.41 -.build-impl: .build-pre .validate-impl .depcheck-impl
    1.42 -	@#echo "=> Running $@... Configuration=$(CONF)"
    1.43 -	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf
    1.44 -
    1.45 -
    1.46 -# clean
    1.47 -.clean-impl: .clean-pre .validate-impl .depcheck-impl
    1.48 -	@#echo "=> Running $@... Configuration=$(CONF)"
    1.49 -	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf
    1.50 -
    1.51 -
    1.52 -# clobber 
    1.53 -.clobber-impl: .clobber-pre .depcheck-impl
    1.54 -	@#echo "=> Running $@..."
    1.55 -	for CONF in ${ALLCONFS}; \
    1.56 -	do \
    1.57 -	    "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf; \
    1.58 -	done
    1.59 -
    1.60 -# all 
    1.61 -.all-impl: .all-pre .depcheck-impl
    1.62 -	@#echo "=> Running $@..."
    1.63 -	for CONF in ${ALLCONFS}; \
    1.64 -	do \
    1.65 -	    "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf; \
    1.66 -	done
    1.67 -
    1.68 -# build tests
    1.69 -.build-tests-impl: .build-impl .build-tests-pre
    1.70 -	@#echo "=> Running $@... Configuration=$(CONF)"
    1.71 -	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-tests-conf
    1.72 -
    1.73 -# run tests
    1.74 -.test-impl: .build-tests-impl .test-pre
    1.75 -	@#echo "=> Running $@... Configuration=$(CONF)"
    1.76 -	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .test-conf
    1.77 -
    1.78 -# dependency checking support
    1.79 -.depcheck-impl:
    1.80 -	@echo "# This code depends on make tool being used" >.dep.inc
    1.81 -	@if [ -n "${MAKE_VERSION}" ]; then \
    1.82 -	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES} \$${TESTOBJECTFILES}))" >>.dep.inc; \
    1.83 -	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
    1.84 -	    echo "include \$${DEPFILES}" >>.dep.inc; \
    1.85 -	    echo "endif" >>.dep.inc; \
    1.86 -	else \
    1.87 -	    echo ".KEEP_STATE:" >>.dep.inc; \
    1.88 -	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
    1.89 -	fi
    1.90 -
    1.91 -# configuration validation
    1.92 -.validate-impl:
    1.93 -	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
    1.94 -	then \
    1.95 -	    echo ""; \
    1.96 -	    echo "Error: can not find the makefile for configuration '${CONF}' in project ${PROJECTNAME}"; \
    1.97 -	    echo "See 'make help' for details."; \
    1.98 -	    echo "Current directory: " `pwd`; \
    1.99 -	    echo ""; \
   1.100 -	fi
   1.101 -	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
   1.102 -	then \
   1.103 -	    exit 1; \
   1.104 -	fi
   1.105 -
   1.106 -
   1.107 -# help
   1.108 -.help-impl: .help-pre
   1.109 -	@echo "This makefile supports the following configurations:"
   1.110 -	@echo "    ${ALLCONFS}"
   1.111 -	@echo ""
   1.112 -	@echo "and the following targets:"
   1.113 -	@echo "    build  (default target)"
   1.114 -	@echo "    clean"
   1.115 -	@echo "    clobber"
   1.116 -	@echo "    all"
   1.117 -	@echo "    help"
   1.118 -	@echo ""
   1.119 -	@echo "Makefile Usage:"
   1.120 -	@echo "    make [CONF=<CONFIGURATION>] [SUB=no] build"
   1.121 -	@echo "    make [CONF=<CONFIGURATION>] [SUB=no] clean"
   1.122 -	@echo "    make [SUB=no] clobber"
   1.123 -	@echo "    make [SUB=no] all"
   1.124 -	@echo "    make help"
   1.125 -	@echo ""
   1.126 -	@echo "Target 'build' will build a specific configuration and, unless 'SUB=no',"
   1.127 -	@echo "    also build subprojects."
   1.128 -	@echo "Target 'clean' will clean a specific configuration and, unless 'SUB=no',"
   1.129 -	@echo "    also clean subprojects."
   1.130 -	@echo "Target 'clobber' will remove all built files from all configurations and,"
   1.131 -	@echo "    unless 'SUB=no', also from subprojects."
   1.132 -	@echo "Target 'all' will will build all configurations and, unless 'SUB=no',"
   1.133 -	@echo "    also build subprojects."
   1.134 -	@echo "Target 'help' prints this message."
   1.135 -	@echo ""
   1.136 -