<?xml version="1.0" encoding="UTF-8"?>

<!--

*** GENERATED FROM project.xml - DO NOT EDIT  ***

***         EDIT ../build.xml INSTEAD         ***

For the purpose of easier reading the script

is divided into following sections:

  - initialization

  - compilation

  - jar

  - execution

  - debugging

  - javadoc

  - junit compilation

  - junit execution

  - junit debugging

  - applet

  - cleanup

        -->

<project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="Currency_Convertor_Solution_10-impl">

    <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/>

    <!-- 

                ======================

                INITIALIZATION SECTION 

                ======================

            -->

    <target name="-pre-init">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="-pre-init" name="-init-private">

        <property file="nbproject/private/config.properties"/>

        <property file="nbproject/private/configs/${config}.properties"/>

        <property file="nbproject/private/private.properties"/>

    </target>

    <target depends="-pre-init,-init-private" name="-init-user">

        <property file="${user.properties.file}"/>

        <!-- The two properties below are usually overridden -->

        <!-- by the active platform. Just a fallback. -->

        <property name="default.javac.source" value="1.4"/>

        <property name="default.javac.target" value="1.4"/>

    </target>

    <target depends="-pre-init,-init-private,-init-user" name="-init-project">

        <property file="nbproject/configs/${config}.properties"/>

        <property file="nbproject/project.properties"/>

    </target>

    <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init">

        <j2seproject1:property name="platform.home" value="platforms.${platform.active}.home"/>

        <j2seproject1:property name="platform.bootcp" value="platforms.${platform.active}.bootclasspath"/>

        <j2seproject1:property name="platform.compiler" value="platforms.${platform.active}.compile"/>

        <j2seproject1:property name="platform.javac.tmp" value="platforms.${platform.active}.javac"/>

        <condition property="platform.javac" value="${platform.home}/bin/javac">

            <equals arg1="${platform.javac.tmp}" arg2="$${platforms.${platform.active}.javac}"/>

        </condition>

        <property name="platform.javac" value="${platform.javac.tmp}"/>

        <j2seproject1:property name="platform.java.tmp" value="platforms.${platform.active}.java"/>

        <condition property="platform.java" value="${platform.home}/bin/java">

            <equals arg1="${platform.java.tmp}" arg2="$${platforms.${platform.active}.java}"/>

        </condition>

        <property name="platform.java" value="${platform.java.tmp}"/>

        <j2seproject1:property name="platform.javadoc.tmp" value="platforms.${platform.active}.javadoc"/>

        <condition property="platform.javadoc" value="${platform.home}/bin/javadoc">

            <equals arg1="${platform.javadoc.tmp}" arg2="$${platforms.${platform.active}.javadoc}"/>

        </condition>

        <property name="platform.javadoc" value="${platform.javadoc.tmp}"/>

        <condition property="platform.invalid" value="true">

            <or>

                <contains string="${platform.javac}" substring="$${platforms."/>

                <contains string="${platform.java}" substring="$${platforms."/>

                <contains string="${platform.javadoc}" substring="$${platforms."/>

            </or>

        </condition>

        <fail unless="platform.home">Must set platform.home</fail>

        <fail unless="platform.bootcp">Must set platform.bootcp</fail>

        <fail unless="platform.java">Must set platform.java</fail>

        <fail unless="platform.javac">Must set platform.javac</fail>

        <fail if="platform.invalid">

 The J2SE Platform is not correctly set up.

 Your active platform is: ${platform.active}, but the corresponding property "platforms.${platform.active}.home" is not found in the project's properties files. 

 Either open the project in the IDE and setup the Platform with the same name or add it manually.

 For example like this:

     ant -Duser.properties.file=<path_to_property_file> jar (where you put the property "platforms.${platform.active}.home" in a .properties file)

  or ant -Dplatforms.${platform.active}.home=<path_to_JDK_home> jar (where no properties file is used) 

  </fail>

        <available file="${manifest.file}" property="manifest.available"/>

        <condition property="manifest.available+main.class">

            <and>

                <isset property="manifest.available"/>

                <isset property="main.class"/>

                <not>

                    <equals arg1="${main.class}" arg2="" trim="true"/>

                </not>

            </and>

        </condition>

        <condition property="manifest.available+main.class+mkdist.available">

            <and>

                <istrue value="${manifest.available+main.class}"/>

                <isset property="libs.CopyLibs.classpath"/>

            </and>

        </condition>

        <condition property="have.tests">

            <or>

                <available file="${test.src.dir}"/>

            </or>

        </condition>

        <condition property="have.sources">

            <or>

                <available file="${src.dir}"/>

            </or>

        </condition>

        <condition property="netbeans.home+have.tests">

            <and>

                <isset property="netbeans.home"/>

                <isset property="have.tests"/>

            </and>

        </condition>

        <condition property="no.javadoc.preview">

            <and>

                <isset property="javadoc.preview"/>

                <isfalse value="${javadoc.preview}"/>

            </and>

        </condition>

        <property name="run.jvmargs" value=""/>

        <property name="javac.compilerargs" value=""/>

        <property name="work.dir" value="${basedir}"/>

        <condition property="no.deps">

            <and>

                <istrue value="${no.dependencies}"/>

            </and>

        </condition>

        <property name="javac.debug" value="true"/>

        <property name="javadoc.preview" value="true"/>

        <property name="application.args" value=""/>

        <property name="source.encoding" value="${file.encoding}"/>

        <condition property="javadoc.encoding.used" value="${javadoc.encoding}">

            <and>

                <isset property="javadoc.encoding"/>

                <not>

                    <equals arg1="${javadoc.encoding}" arg2=""/>

                </not>

            </and>

        </condition>

        <property name="javadoc.encoding.used" value="${source.encoding}"/>

        <property name="includes" value="**"/>

        <property name="excludes" value=""/>

        <property name="do.depend" value="false"/>

        <condition property="do.depend.true">

            <istrue value="${do.depend}"/>

        </condition>

        <condition else="" property="javac.compilerargs.jaxws" value="-Djava.endorsed.dirs='${jaxws.endorsed.dir}'">

            <and>

                <isset property="jaxws.endorsed.dir"/>

                <available file="nbproject/jaxws-build.xml"/>

            </and>

        </condition>

    </target>

    <target name="-post-init">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check">

        <fail unless="src.dir">Must set src.dir</fail>

        <fail unless="test.src.dir">Must set test.src.dir</fail>

        <fail unless="build.dir">Must set build.dir</fail>

        <fail unless="dist.dir">Must set dist.dir</fail>

        <fail unless="build.classes.dir">Must set build.classes.dir</fail>

        <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>

        <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail>

        <fail unless="build.test.results.dir">Must set build.test.results.dir</fail>

        <fail unless="build.classes.excludes">Must set build.classes.excludes</fail>

        <fail unless="dist.jar">Must set dist.jar</fail>

    </target>

    <target name="-init-macrodef-property">

        <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1">

            <attribute name="name"/>

            <attribute name="value"/>

            <sequential>

                <property name="@{name}" value="${@{value}}"/>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-macrodef-javac">

        <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">

            <attribute default="${src.dir}" name="srcdir"/>

            <attribute default="${build.classes.dir}" name="destdir"/>

            <attribute default="${javac.classpath}" name="classpath"/>

            <attribute default="${includes}" name="includes"/>

            <attribute default="${excludes}" name="excludes"/>

            <attribute default="${javac.debug}" name="debug"/>

            <attribute default="" name="sourcepath"/>

            <element name="customize" optional="true"/>

            <sequential>

                <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" executable="${platform.javac}" fork="yes" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}">

                    <classpath>

                        <path path="@{classpath}"/>

                    </classpath>

                    <compilerarg line="${javac.compilerargs} ${javac.compilerargs.jaxws}"/>

                    <customize/>

                </javac>

            </sequential>

        </macrodef>

        <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3">

            <attribute default="${src.dir}" name="srcdir"/>

            <attribute default="${build.classes.dir}" name="destdir"/>

            <attribute default="${javac.classpath}" name="classpath"/>

            <sequential>

                <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}">

                    <classpath>

                        <path path="@{classpath}"/>

                    </classpath>

                </depend>

            </sequential>

        </macrodef>

        <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3">

            <attribute default="${build.classes.dir}" name="destdir"/>

            <sequential>

                <fail unless="javac.includes">Must set javac.includes</fail>

                <pathconvert pathsep="," property="javac.includes.binary">

                    <path>

                        <filelist dir="@{destdir}" files="${javac.includes}"/>

                    </path>

                    <globmapper from="*.java" to="*.class"/>

                </pathconvert>

                <delete>

                    <files includes="${javac.includes.binary}"/>

                </delete>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-macrodef-junit">

        <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3">

            <attribute default="${includes}" name="includes"/>

            <attribute default="${excludes}" name="excludes"/>

            <attribute default="**" name="testincludes"/>

            <sequential>

                <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" jvm="${platform.java}" showoutput="true">

                    <batchtest todir="${build.test.results.dir}">

                        <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}">

                            <filename name="@{testincludes}"/>

                        </fileset>

                    </batchtest>

                    <classpath>

                        <path path="${run.test.classpath}"/>

                    </classpath>

                    <syspropertyset>

                        <propertyref prefix="test-sys-prop."/>

                        <mapper from="test-sys-prop.*" to="*" type="glob"/>

                    </syspropertyset>

                    <formatter type="brief" usefile="false"/>

                    <formatter type="xml"/>

                    <jvmarg line="${run.jvmargs}"/>

                </junit>

            </sequential>

        </macrodef>

    </target>

    <target depends="-init-debug-args" name="-init-macrodef-nbjpda">

        <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1">

            <attribute default="${main.class}" name="name"/>

            <attribute default="${debug.classpath}" name="classpath"/>

            <attribute default="" name="stopclassname"/>

            <sequential>

                <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}">

                    <classpath>

                        <path path="@{classpath}"/>

                    </classpath>

                    <bootclasspath>

                        <path path="${platform.bootcp}"/>

                    </bootclasspath>

                </nbjpdastart>

            </sequential>

        </macrodef>

        <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1">

            <attribute default="${build.classes.dir}" name="dir"/>

            <sequential>

                <nbjpdareload>

                    <fileset dir="@{dir}" includes="${fix.classes}">

                        <include name="${fix.includes}*.class"/>

                    </fileset>

                </nbjpdareload>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-debug-args">

        <exec executable="${platform.java}" outputproperty="version-output">

            <arg value="-version"/>

        </exec>

        <condition property="have-jdk-older-than-1.4">

            <or>

                <contains string="${version-output}" substring="java version &quot;1.0"/>

                <contains string="${version-output}" substring="java version &quot;1.1"/>

                <contains string="${version-output}" substring="java version &quot;1.2"/>

                <contains string="${version-output}" substring="java version &quot;1.3"/>

            </or>

        </condition>

        <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none">

            <istrue value="${have-jdk-older-than-1.4}"/>

        </condition>

        <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem">

            <os family="windows"/>

        </condition>

        <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}">

            <isset property="debug.transport"/>

        </condition>

    </target>

    <target depends="-init-debug-args" name="-init-macrodef-debug">

        <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3">

            <attribute default="${main.class}" name="classname"/>

            <attribute default="${debug.classpath}" name="classpath"/>

            <element name="customize" optional="true"/>

            <sequential>

                <java classname="@{classname}" dir="${work.dir}" fork="true" jvm="${platform.java}">

                    <jvmarg line="${debug-args-line}"/>

                    <jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>

                    <jvmarg line="${run.jvmargs}"/>

                    <classpath>

                        <path path="@{classpath}"/>

                    </classpath>

                    <syspropertyset>

                        <propertyref prefix="run-sys-prop."/>

                        <mapper from="run-sys-prop.*" to="*" type="glob"/>

                    </syspropertyset>

                    <customize/>

                </java>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-macrodef-java">

        <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1">

            <attribute default="${main.class}" name="classname"/>

            <element name="customize" optional="true"/>

            <sequential>

                <java classname="@{classname}" dir="${work.dir}" fork="true" jvm="${platform.java}">

                    <jvmarg line="${run.jvmargs}"/>

                    <classpath>

                        <path path="${run.classpath}"/>

                    </classpath>

                    <syspropertyset>

                        <propertyref prefix="run-sys-prop."/>

                        <mapper from="run-sys-prop.*" to="*" type="glob"/>

                    </syspropertyset>

                    <customize/>

                </java>

            </sequential>

        </macrodef>

    </target>

    <target name="-init-presetdef-jar">

        <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1">

            <jar compress="${jar.compress}" jarfile="${dist.jar}">

                <j2seproject1:fileset dir="${build.classes.dir}"/>

            </jar>

        </presetdef>

    </target>

    <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar" name="init"/>

    <!--

                ===================

                COMPILATION SECTION

                ===================

            -->

    <target depends="init" name="deps-jar" unless="no.deps"/>

    <target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/>

    <target depends="init" name="-check-automatic-build">

        <available file="${build.classes.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/>

    </target>

    <target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build">

        <antcall target="clean"/>

    </target>

    <target depends="init,deps-jar" name="-pre-pre-compile">

        <mkdir dir="${build.classes.dir}"/>

    </target>

    <target name="-pre-compile">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target if="do.depend.true" name="-compile-depend">

        <j2seproject3:depend/>

    </target>

    <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-compile-depend" if="have.sources" name="-do-compile">

        <j2seproject3:javac/>

        <copy todir="${build.classes.dir}">

            <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>

        </copy>

    </target>

    <target name="-post-compile">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/>

    <target name="-pre-compile-single">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single">

        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>

        <j2seproject3:force-recompile/>

        <j2seproject3:javac excludes="" includes="${javac.includes}" sourcepath="${src.dir}"/>

    </target>

    <target name="-post-compile-single">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/>

    <!--

                ====================

                JAR BUILDING SECTION

                ====================

            -->

    <target depends="init" name="-pre-pre-jar">

        <dirname file="${dist.jar}" property="dist.jar.dir"/>

        <mkdir dir="${dist.jar.dir}"/>

    </target>

    <target name="-pre-jar">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-pre-jar,-pre-jar" name="-do-jar-without-manifest" unless="manifest.available">

        <j2seproject1:jar/>

    </target>

    <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class">

        <j2seproject1:jar manifest="${manifest.file}"/>

    </target>

    <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available">

        <j2seproject1:jar manifest="${manifest.file}">

            <j2seproject1:manifest>

                <j2seproject1:attribute name="Main-Class" value="${main.class}"/>

            </j2seproject1:manifest>

        </j2seproject1:jar>

        <echo>To run this application from the command line without Ant, try:</echo>

        <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>

        <property location="${dist.jar}" name="dist.jar.resolved"/>

        <pathconvert property="run.classpath.with.dist.jar">

            <path path="${run.classpath}"/>

            <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/>

        </pathconvert>

        <echo>${platform.java} -cp "${run.classpath.with.dist.jar}" ${main.class}</echo>

    </target>

    <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class+mkdist.available" name="-do-jar-with-libraries">

        <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>

        <pathconvert property="run.classpath.without.build.classes.dir">

            <path path="${run.classpath}"/>

            <map from="${build.classes.dir.resolved}" to=""/>

        </pathconvert>

        <pathconvert pathsep=" " property="jar.classpath">

            <path path="${run.classpath.without.build.classes.dir}"/>

            <chainedmapper>

                <flattenmapper/>

                <globmapper from="*" to="lib/*"/>

            </chainedmapper>

        </pathconvert>

        <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/>

        <copylibs compress="${jar.compress}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}">

            <fileset dir="${build.classes.dir}"/>

            <manifest>

                <attribute name="Main-Class" value="${main.class}"/>

                <attribute name="Class-Path" value="${jar.classpath}"/>

            </manifest>

        </copylibs>

        <echo>To run this application from the command line without Ant, try:</echo>

        <property location="${dist.jar}" name="dist.jar.resolved"/>

        <echo>${platform.java} -jar "${dist.jar.resolved}"</echo>

    </target>

    <target name="-post-jar">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries,-post-jar" description="Build JAR." name="jar"/>

    <!--

                =================

                EXECUTION SECTION

                =================

            -->

    <target depends="init,compile" description="Run a main class." name="run">

        <j2seproject1:java>

            <customize>

                <arg line="${application.args}"/>

            </customize>

        </j2seproject1:java>

    </target>

    <target name="-do-not-recompile">

        <property name="javac.includes.binary" value=""/>

    </target>

    <target depends="init,-do-not-recompile,compile-single" name="run-single">

        <fail unless="run.class">Must select one file in the IDE or set run.class</fail>

        <j2seproject1:java classname="${run.class}"/>

    </target>

    <!--

                =================

                DEBUGGING SECTION

                =================

            -->

    <target depends="init" if="netbeans.home" name="-debug-start-debugger">

        <j2seproject1:nbjpdastart name="${debug.class}"/>

    </target>

    <target depends="init,compile" name="-debug-start-debuggee">

        <j2seproject3:debug>

            <customize>

                <arg line="${application.args}"/>

            </customize>

        </j2seproject3:debug>

    </target>

    <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/>

    <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto">

        <j2seproject1:nbjpdastart stopclassname="${main.class}"/>

    </target>

    <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/>

    <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single">

        <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>

        <j2seproject3:debug classname="${debug.class}"/>

    </target>

    <target depends="init,-do-not-recompile,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/>

    <target depends="init" name="-pre-debug-fix">

        <fail unless="fix.includes">Must set fix.includes</fail>

        <property name="javac.includes" value="${fix.includes}.java"/>

    </target>

    <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix">

        <j2seproject1:nbjpdareload/>

    </target>

    <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/>

    <!--

                ===============

                JAVADOC SECTION

                ===============

            -->

    <target depends="init" name="-javadoc-build">

        <mkdir dir="${dist.javadoc.dir}"/>

        <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" executable="${platform.javadoc}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}">

            <classpath>

                <path path="${javac.classpath}"/>

            </classpath>

            <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}">

                <filename name="**/*.java"/>

            </fileset>

        </javadoc>

    </target>

    <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview">

        <nbbrowse file="${dist.javadoc.dir}/index.html"/>

    </target>

    <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/>

    <!--

                =========================

                JUNIT COMPILATION SECTION

                =========================

            -->

    <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test">

        <mkdir dir="${build.test.classes.dir}"/>

    </target>

    <target name="-pre-compile-test">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target if="do.depend.true" name="-compile-test-depend">

        <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/>

    </target>

    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test">

        <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/>

        <copy todir="${build.test.classes.dir}">

            <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>

        </copy>

    </target>

    <target name="-post-compile-test">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/>

    <target name="-pre-compile-test-single">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single">

        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>

        <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/>

        <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" sourcepath="${test.src.dir}" srcdir="${test.src.dir}"/>

        <copy todir="${build.test.classes.dir}">

            <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>

        </copy>

    </target>

    <target name="-post-compile-test-single">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/>

    <!--

                =======================

                JUNIT EXECUTION SECTION

                =======================

            -->

    <target depends="init" if="have.tests" name="-pre-test-run">

        <mkdir dir="${build.test.results.dir}"/>

    </target>

    <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run">

        <j2seproject3:junit testincludes="**/*Test.java"/>

    </target>

    <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run">

        <fail if="tests.failed">Some tests failed; see details above.</fail>

    </target>

    <target depends="init" if="have.tests" name="test-report"/>

    <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/>

    <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/>

    <target depends="init" if="have.tests" name="-pre-test-run-single">

        <mkdir dir="${build.test.results.dir}"/>

    </target>

    <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single">

        <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail>

        <j2seproject3:junit excludes="" includes="${test.includes}"/>

    </target>

    <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single">

        <fail if="tests.failed">Some tests failed; see details above.</fail>

    </target>

    <target depends="init,-do-not-recompile,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/>

    <!--

                =======================

                JUNIT DEBUGGING SECTION

                =======================

            -->

    <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test">

        <fail unless="test.class">Must select one file in the IDE or set test.class</fail>

        <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/>

        <delete file="${test.report.file}"/>

        <mkdir dir="${build.test.results.dir}"/>

        <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}">

            <customize>

                <syspropertyset>

                    <propertyref prefix="test-sys-prop."/>

                    <mapper from="test-sys-prop.*" to="*" type="glob"/>

                </syspropertyset>

                <arg value="${test.class}"/>

                <arg value="showoutput=true"/>

                <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/>

                <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/>

            </customize>

        </j2seproject3:debug>

    </target>

    <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test">

        <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/>

    </target>

    <target depends="init,-do-not-recompile,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/>

    <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test">

        <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/>

    </target>

    <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/>

    <!--

                =========================

                APPLET EXECUTION SECTION

                =========================

            -->

    <target depends="init,compile-single" name="run-applet">

        <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>

        <j2seproject1:java classname="sun.applet.AppletViewer">

            <customize>

                <arg value="${applet.url}"/>

            </customize>

        </j2seproject1:java>

    </target>

    <!--

                =========================

                APPLET DEBUGGING  SECTION

                =========================

            -->

    <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet">

        <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>

        <j2seproject3:debug classname="sun.applet.AppletViewer">

            <customize>

                <arg value="${applet.url}"/>

            </customize>

        </j2seproject3:debug>

    </target>

    <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/>

    <!--

                ===============

                CLEANUP SECTION

                ===============

            -->

    <target depends="init" name="deps-clean" unless="no.deps"/>

    <target depends="init" name="-do-clean">

        <delete dir="${build.dir}"/>

        <delete dir="${dist.dir}"/>

    </target>

    <target name="-post-clean">

        <!-- Empty placeholder for easier customization. -->

        <!-- You can override this target in the ../build.xml file. -->

    </target>

    <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/>

</project>